Toyoda FA800S 2015

machine specification

• SPINDLE TAPER (CAT/BT)
• CAT #50

• SPINDLE SPEED
• 6,000 RPM

• PALLET SIZE (INCHES)
• 31.5" x 31.5"

• ROTARY TABLE INDEX INCREMENTS
• 1 Degree

• WORK TABLE TRAVEL (X)
• 53.1”

• SPINDLE HEAD VERTICAL TRAVEL (Y)
• 45.2”

• COLUMN CROSS TRAVEL (Z)
• 45.2”

• RAPID TRAVERSES (X/Y/Z)
• 944 IPM

• PALLET HEIGHT FROM FLOOR
• 51.2”

• SPINDLE GAUGE LINE TO ROTARY TABLE CENTER
• 7.9" - 53.1"

• SPINDLE CENTER TO TOP FACE OF PALLET
• 2.0" - 47.2"

• MAXIMUM WORK ENVELOPE
• Ø63.0" x 51.2"

• MAXIMUM WORK HEIGHT
• 51.2”

• CUTTING FEEDRATE (X/Y/Z)
• .04 - 944 IPM

• SPINDLE SPEED (INFINITELY VARIABLE)
• 35 - 6,000 RPM

• SPINDLE DIAMETER (FRONT BEARING ID/6,000 RPM SPINDLE)
• 4.33"

• SPINDLE NOSE TAPER
• ISO R297 #50

• PULLSTUD
• MAS Type I P50T

• STANDARD TOOL STORAGE CAPACITY
• 60

• MAXIMUM TOOL SIZE (DIAMETER)
• 10.63" Cylindrical / 15.75" Boring Tool

• MAXIMUM TOOL SIZE (LENGTH
• 31.5"

• MAXIMUM TOOL WEIGHT
• 77 lbs.

• TABLE INDEXING TIME
• 90º / 5 sec; 180º / 7.2 sec.

• TOOL TO TOOL CHANGE CYCLE TIME
• 2.0 sec. (33 lbs.)

• TOOL SELECTION RANDOM
• 3 Poc / Sec.

• SPINDLE DRIVE MOTOR (6,000 RPM SPINDLE)
• AC 40 HP for 30 min. / AC 30 HP cont.

• SPINDLE TORQUE
• 440 ft-lb / 35 - 350 RPM

• STANDARD FLOOR SPACE
• 191" X 301"

• PALLET CHANGE TIME
• 37 sec.

• HYDRAULIC OIL
• Mobil DTE Oil Light 16.6 gal. (63 liter)

• SLIDEWAY LUBRICATION:
• Mobil Vacuoline 1405 1.5 gal. (5.5 liter)

• SPINDLE BEARING LUBRICATION
• Mobil Velocite #6 .76 gal. (2.9 liter)

• SPINDLE COOLING
• Mobil Velocite #3 9.2 gal. (35 liter)

• TABLE LUBRICATION
• Mobil Vacuoline 1405 1.1 gal. (4 liter)

• AIR SOURCE
• 56 - 70 psi

• POWER CAPACITY (MACHINE WIRED: 208V - TRANSFORMER NOT INCLUDED)
• 79 kVA

• LINEAR POSITION ACCURACY
• ± .00012" full stroke

• LINEAR REPEATABILITY
• ± .00006”

• ROTARY TABLE INDEX ACCURACY
• ± 3 arc seconds

• MAXIMUM WORK LOAD ON THE PALLET
• 5,500 lbs.

• ALLOWABLE THRUST LOAD (6,000 RPM SPINDLE)
• 3,303 lbs.

machine equipped with

• BRAND NEW - NEVER USED
• STILL IN CRATE
• INTERPOLATION- LINEAR AND CIRCULAR
• 1 AUTOMATIC AIR BLOW SPINDLE NOSE CLEANER
• AUTOMATIC CENTRALIZED LUBRICATOR
• AUTOMATIC POWER SHUT OFF
• AUTOMATIC PALLET CHANGER WITH TWO (2) T-SLOTTED PALLETS
• AUTOMATIC SPINDLE ORIENTATION
• CHIP WASH COOLANT
• COOLANT/REJECTED OIL SEPARATOR
• HAND HELD SPLASH GUN
• HYDRAULIC POWER UNIT
• MACHINE AUGER
• CHIP CONVEYOR WITH 50" DISCHARGE HEIGHT
• INSTALLATION ACCESSORIES
• ISOLATED RE-CIRCULATING COOLANT SUPPLY UNIT
• 279 GALLON COOLANT RESERVOIR WITH (2) PUMPS FOR FLOOD COOLANT AND CHIP WASH. PARTS COUNTER (LCD DISPLAY)
• RUN HOUR DISPLAY (LCD DISPLAY)
• SHIPPING BRACKET
• SPINDLE AND AXIS LOAD METER (LCD DISPLAY)
• SPINDLE OIL COOLING UNIT
• SPINDLE RPM METER (LCD DISPLAY)
• SPLASH GUARD
• WORK AREA LAMP